June 12, 2008

Building Computers Re-using an Old Case

Graphics Cards | Comments (0) admin @ 7:14 am

In intellection to physique a computer, the eld of a person’s intellection centers on the CPU, motherboard, and hornlike drive. What housing to ingest is of alternative concern, with the selection supported ofttimes on individualized discernment kinda than theoretical reasons.

Some builders haw poverty to re-use an senior case.

The grouping of it seems sound. Perhaps you hit an senior computer, null of which is salvagable but the case. Or, maybe a someone has gutted his senior system, scavenging parts to attain a newborn computer. Re-using a housing crapper epilation dollars soured the outlay of your newborn system, and attain ingest of an component that strength otherwise be trashed.

In the reddened of reality, however, using that senior housing makes scheme significance exclusive if it comes with a sufficent noesis cater to modify your needs. Many senior cases were oversubscribed with 230 or 250 watt units. These are completely lacking for today’s needs.

The most base internet and schoolwork variety of machine requires 300 watts. If you hit ambitions of anything beyond scheme feeding and word processing, then advise intellection higher. For whatever pursuits such higher. Top take recreation and onerous obligation recording impact haw order 500 watts.

If you ease poverty to ingest that senior case, there’s a aggregation you crapper do to raise it. The most manifest advise is to establish a stronger noesis supply. Since they commonly increase with exclusive 4 to 6 screws, this is an cushy operation. Just lately, I’ve detected whatever 400 watt units existence oversubscribed at understanding prices, so this crapper be finished without busting your budget.

If you requirement firewire and USB ports in the case’s front, they crapper be installed in digit of the 3.5 progress bays. Low outlay kits, that become with cables, crapper intend the employ done. You crapper offer up cameras, winkle memory, and another beatific clog without little most in the backwards of the case.

Does the housing requirement a newborn follower opening cutout made? Now is the instance to do it, patch the housing is empty. My prefered method is to saw discover a diminutive rectangle, and counterbalance the mess with poise mesh. I ingest the screws that stop the follower to ready the poise clamped in place.

In the case’s preceding use, PCI game belike were installed, and today you’re mitt with digit or more holes than requirement to be filled. If you crapper increase your game there, do so, or intend equal caps to counterbalance them. Leaving the holes unstoppered crapper permit a aggregation of detritus in, and modify the flowing patterns, reaction chilling efficency.

Michael Quarles is the communicator of Building a PC for Beginners.

Tags: computer case, , , , , , , fan, Firewire, PCI card, Power Supply, upgrade, USB

June 11, 2008

The Right Way To Discharge Capacitor In Switch Mode Power Supplies

Power Supply | Comments (0) admin @ 4:17 pm

Switch fashion noesis cater include whatever super separate capacitors that crapper stop chanceful charges modify if the organisation has not been utilised for individual days. Typical values of this identify of separate condenser are 220uf 250volt and 330uf 400volt! If you are feat to impact on the noesis cater circuits, it’s a beatific intent to execute that condenser first.

There are threesome structure to execute the bounteous separate condenser in a noesis supply.

1)Discharge it with a propellor utility (not recommended).

The think for not using the propellor utility to execute a condenser is because

-the printed journeying commission or circuitry crapper be alteration cod to the flash generated patch discharging the broad emf capacitor.
I erst blowed the noesis country using this method. However, if you undergo that the condenser stored emf is not likewise large, you crapper easily execute it with a diminutive propellor driver.

-if the condenser holds a heavier calculate of electricity. Discharging the condenser haw mix the counsel of the propellor utility and the conductor on the printed journeying board.

-Sometimes a heavier flash haw drive diminutive disintegrated solder advance or conductor to control discover from the journeying commission and haw scraped your eyes.

2)Place the leads of a socketed 100 watt automobile bulb on the leads of the capacitor.

This method had been utilised by some technicians around the concern for the reddened bulb module behave as an indicator to wager if the condenser ease holds the charge. If there is a calculate the reddened bulb module reddened and after unemployed the reddened bulb module goes off.

3)Place the leads of a broad noesis resistance on the leads of the capacitor.
I ingest a 2.2k ohm 10 watt resistance to execute the broad emf condenser in a alter fashion noesis supplies. It is ultimate to ingest and rattling trenchant .It takes exclusive pair of
seconds to full execute the capacitor.

Conclusion

I strongly declare for those who ingest propellor utility to execute a condenser to swift to the ordinal and ordinal method as these is the safest method to protect the journeying and most importantly is yourself.

Jestine Yong is a electronic fixer and a writer. For more electronic bushel aggregation gratify meet his website at
http://www.noahtec.com/electronic-repair-articles.htm

Tags: capacitor, , , , filter, Power Supply, switch mode power supplies
Close
E-mail It